I’m not sure why, but when I wrote the last post, I completely forgot that I still had all of the dimpling to do for the elevators prior to priming…

Anyways, tonight I finished the priming prep of the stiffeners with scotchbrite pads.  I also used the scotchbrite on all of the rudder skeleton parts.  After all that scrubbing, I dimpled all of the stiffeners and set the garage up for dimpling the elevator skins.

Here are the rudder parts after scotchbrite.

Here’s a blurry shot of the stiffeners after dimpling.  I’ve kept them organized in rows so that I won’t lose track of them even if the markings are striped off or primed over.

Finally, I moved the benches next to one another instead of forming one long bench.  This allows me to better support the skins and prevents dents, scratches, and mistakes while dimpling with the c-frame. 

Tonight I finished all of the final drilling and removed all of the stiffeners.  I have labeled each stiffener according to position and elevator. (ex. G, RB for right bottom)  Knowing that the labels will be removed as I clean the stiffeners for priming, I labeled their location on my priming table.  As long as I don’t move things around haphazardly, I can keep track of all the pieces.  After labeling, I was able to deburr all the holes and get about 2/3 of the scotchbrite priming prep done on the stiffeners.  I will still need to scotchbrite the remaining stiffeners, the rudder skeleton, and the interiors of the elevator skins before I clean and then prime.  I’m hoping to be done the priming process and maybe even get to riveting this weekend.  

I really didn’t feel like working on the plane tonight. The weather is miserable out, and the drive home was terrible. But I’m really trying to keep myself on pace.

That said I got the remaining plastic done and almost all of the final drilling. Priming will be very soon for the stiffeners.