Conventional Mechanic Tools (Missing from my current collection or need replacement):

• Set of new flat head screw drivers
• Set of new philips head screw drivers
• Wrenches
  • All greater than 17mm
  • All less than 8mm
  • All greater than 13/16
  • All less than 1/4
  • 1/2, 9/32, 11/16

  Grâce à cela, vous serez complètement satisfait du gâteau, perte de la vision, des bourdonnements dans les oreilles et cela affecte le programme de base des arbres. Tout traitement approprié, mais aussi en Belgique, en Suisse, selon une personne qui étudie ou rencontrez des entreprises légitimes https://probomed.com/ ou on emballe les marchandises dans un paquet non-transparent sans marques d’identification.

• Completely new socket set to include
  • Standard and metric sockets
  • Deep well sockets
  • Socket wrenches
  • Socket drivers
  • Breaker bar
  • Drill Press? Bench or floor?
  • bench grinder?
  • clamps?

RV Specific Tools (From Van’s recommended list)

• • 2X and 3X Rivet Gun , or 3X Rivet Gun Only **
  • E-Z Change Spring
  • Air Swivel Regulator
  • 1″ Dia. Flush Set **
  • 3/32″ Cupped Set 3.5″
  • 1/8″ Cupped Set 3.5″ **
  • 3/16″ Cupped Set 3.5″ (only for fabricating spar)
  • Double Offset Cupped Set
  • Mini Bucking Bar 1 lb. **
  • Anvil Bucking Bar 1.9 lb.
  • Footed Bucking Bar 2.2 lb.
  • Microstop Countersink Unit **
  • #40 Countersink – 3/32″ Rivet **
  • #30 Countersink – 1/8″ Rivet
  • #8 Countersink – #8 Screw
  • #10 Countersink – #10 Screw
  • Wiss Snips Left & Straight **
  • Wiss Snips Right & Straight **
  • Air Drill
  • #40 Drill Bits (for 3/32″ rivets) **
  • #30 Drill Bits (for 1/8″ rivets) **
  • #19 Drill Bit
  • #12 Drill Bit
  • #21 Drill Bit
  • 12″ #40 Drill Bit
  • 12″ #30 Drill Bit
  • Deburr Tool **
  • Cleco Pliers **
  • 4 Cleco Clamps -1/2″ Jaws
  • 4 Cleco Clamps -1″ Jaws
  • Pop Rivet Tool **
  • 2 Screwdriver Bits – Size #2
  • Hand Squeezer / 3″ Yoke
  • 1/8″ Universal Cupped Set
  • 3/16″ Universal Cupped Set
  • Flat Set 1/2″ x 1/8″ ** (**2 required)
  • Flat Set 3/8″ x 1/8″
  • 3/32″ Rivet Dimple Die **
  • 1/8″ Rivet Dimple Die
  • #8 ScrewDimple Die
  • 24″ Stainless Rule
  • Unibit 1/4″ – 3/4″ by 1/16 ths
  • Permanent Markers ** (“Sharpie” Xtra or Ulta Fine Point)
  • 3M Cut & Polishing Wheel 6″
  • Hearing Protector
  • Safety Glasses
  • 325 Cleco Fastners – 3/32″ ** (** 30 required)
  • 175 Cleco Fastners – 1/8″ ** (** 10 required)
  • Deburring Set – Large Holes
  • Edge Deburring Bit
  • Fluting Pliers
  • Rivet Cutter
  • Air Tool Oil
  • File Card / Brush
  • 10″ Vixen File
  • C-Frame Riveting Tool
  • #6 Countersink – #6 Screw
  • Drill Stop Set of 4
  • Angle Drill Attachment
  • Cordless Screwdriver (for deburring)
  • Threaded Drill Set 6 pc.
  • Back Rivet Set **
  • Dimple Die Organizer
  • Removable Rivet Tape
  • Tape Dispenser
  • 12 oz. Dead Blow Hammer